Car A/C Repair and Performance Check in Holmes, NY

Blowing Warm Air? Beat the Summer Heat With Expert A/C Service.

Vehicle Health

Cold A/C, Honest Answers

When your car's air conditioning stops blowing cold, there's no suffering through another Hudson Valley summer. Roll into Metric Motors in Holmes, NY, and we'll run a full A/C performance check, identify the cause, and tell you exactly what it will take to get you back to icy-cold comfort.

Most A/C problems come down to one of a few causes: low refrigerant from a slow leak, a failed compressor, a clogged expansion valve, or a bad blend door actuator. We use professional-grade A/C diagnostic equipment to pressure-test the system, measure vent temperatures, check airflow, and inspect for leaks — so you get a real answer, not a guess.


What's Included in Our A/C Performance Check
  • Check A/C system performance

  • Inspect refrigerant level and pressure

  • System pressure and performance test (R-134a and R-1234yf)

  • Recharge refrigerant if needed (additional cost based on capacity)

  • Measure vent temperature (front and rear, if equipped)

  • Compressor, clutch, and belt inspection

  • Inspect for visible leaks (condenser, hoses, evaporator access points)

  • Cabin air filter check (a clogged filter kills airflow)

  • Verify airflow and cooling performance

  • Blower motor and fan speed test


Common A/C Problems We Fix
  • Weak or warm airflow

  • A/C that works sometimes and then stops

  • Musty or moldy smell when A/C runs

  • Loud clicking, buzzing, or grinding from the compressor

  • Water leaking into the passenger footwell

  • Rear A/C not cooling on SUVs and minivans

  • A/C light flashing or auto-climate malfunction

  • Full compressor, condenser, or evaporator replacement

Whether your car is a domestic daily driver or a European luxury vehicle with a more complex climate control system, our ASE-Certified technicians have the tools and training to handle it.


Why Drivers Choose Metric Motors
  • Family-Owned Shop Serving Dutchess & Putnam Counties

  • ASE-Certified Technicians For Domestic and European Vehicles

  • Friendly, Convenient Service With A Comfortable Waiting Area

  • Clear Answers Before Any Repair Work Begins

  • Transparent Pricing — No Surprise Charges At Pickup

  • 12 Months / 12,000 Miles Guarantee


Serving Holmes, Hopewell Junction & the Hudson Valley

From our Holmes, NY shop, we serve drivers across Hopewell Junction, Pawling, Brewster, Carmel, Beacon, Poughkeepsie, Fishkill, and the surrounding Dutchess and Putnam County communities. If you need A/C repair done right — and done honestly — we're the local shop to call.

4.7 (799 reviews)

1-2 hours

Starting at $49

Ready to Give Your Car the
Care It Deserves?

Sign up for our newsletter to keep up to date on specials and offers.

Keep in Touch

Ready to Give Your Car the Care It Deserves?

Schedule a wash or repair in minutes — our experts are here 7 days a week to keep your car running perfectly.

Keep in Touch

Ready to Give Your Car the
Care It Deserves?

Sign up for our newsletter to keep up to date on specials and offers.

Keep in Touch

Frequently Asked Questions

What types of vehicles do you service?

At Metric Motors, we service all makes and models, foreign and domestic. This includes everyday sedans and SUVs, trucks, European vehicles, performance vehicles, and hybrids. We have the tools, training, equipment, and expertise to properly service and repair modern vehicles of all types.

Do you perform New York State inspections?

Yes — we are a licensed New York State Inspection Station. Inspections are available by appointment or walk-in, depending on availability. You can schedule online, find us on Google, or call the shop directly.

How much does an oil change cost at Metric Motors?

We’re known for offering some of the best oil change values in Putnam and Dutchess Counties — and beyond. We offer a full synthetic Valvoline oil change starting at just $24.95, performed by experienced professional technicians — not a quick-lube operation. It’s one of the strongest values in the Northeast for a properly serviced, full synthetic oil change.

What makes Metric Motors different from other auto repair shops?

Metric Motors is known as the dealer alternative, without dealer pricing or limitations. We are better equipped than many dealerships, with state-of-the-art diagnostic tools, OEM programming capabilities, and advanced repair technology. We’re a true one-stop automotive destination, offering mechanical repair, auto collision services, windshield replacement, advanced diagnostics, OEM programming, and ADAS (Advanced Driver Assistance Systems) calibrations. We also offer courtesy loaner vehicles and shuttle service to help minimize downtime. Every vehicle is serviced with the same care and attention we would give our own, with a focus on doing the job correctly the first time.

Do you work with extended warranty or third-party warranty companies?

Yes. We work with most major third-party and extended warranty providers and assist with the claims process whenever possible. This includes companies such as CarShield, Endurance, Zurich, and other vehicle service contract providers. Coverage depends on your specific policy, but our team will help verify benefits and communicate directly with the warranty administrator.

Do you accept walk-ins?

Yes — we welcome walk-ins whenever possible. Wait times can vary depending on the day and service needed, so we recommend calling our office at any time to check current availability or estimated wait times.

How do I schedule an appointment at Metric Motors?

Scheduling is easy. You can: Visit our website and click the red “Book Appointment” button Book directly through our Google business listing Call our office and schedule with our team We’ll help find the most convenient time for your schedule.

Do you work with fleet accounts or fleet management companies?

Yes. We work with most major fleet management providers and service a wide range of business and commercial vehicles. This includes companies such as Enterprise Fleet Management, ARI, Holman, and similar fleet programs. Any business-use or company-owned vehicle is treated with priority, as we understand that vehicle downtime directly impacts operations. We also regularly service municipal, state, public service, and construction-related vehicles, and handle fleet repairs with efficient turnaround, clear communication, and professional documentation.

Don’t Listen to Us Talk About Metric Motors. Listen to Your Neighbors

Ready to Give Your Car the
Care It Deserves?

Sign up for our newsletter to keep up to date on specials and offers.

Keep in Touch

Build Your Career at Metric Motors

Work alongside experienced professionals, use state-of-the-art equipment, and grow your skills in a fast-paced, rewarding environment.

Frequently Asked Questions

What types of vehicles do you service?

At Metric Motors, we service all makes and models, foreign and domestic. This includes everyday sedans and SUVs, trucks, European vehicles, performance vehicles, and hybrids. We have the tools, training, equipment, and expertise to properly service and repair modern vehicles of all types.

Do you perform New York State inspections?

Yes — we are a licensed New York State Inspection Station. Inspections are available by appointment or walk-in, depending on availability. You can schedule online, find us on Google, or call the shop directly.

How much does an oil change cost at Metric Motors?

We’re known for offering some of the best oil change values in Putnam and Dutchess Counties — and beyond. We offer a full synthetic Valvoline oil change starting at just $24.95, performed by experienced professional technicians — not a quick-lube operation. It’s one of the strongest values in the Northeast for a properly serviced, full synthetic oil change.

What makes Metric Motors different from other auto repair shops?

Metric Motors is known as the dealer alternative, without dealer pricing or limitations. We are better equipped than many dealerships, with state-of-the-art diagnostic tools, OEM programming capabilities, and advanced repair technology. We’re a true one-stop automotive destination, offering mechanical repair, auto collision services, windshield replacement, advanced diagnostics, OEM programming, and ADAS (Advanced Driver Assistance Systems) calibrations. We also offer courtesy loaner vehicles and shuttle service to help minimize downtime. Every vehicle is serviced with the same care and attention we would give our own, with a focus on doing the job correctly the first time.

Do you work with extended warranty or third-party warranty companies?

Yes. We work with most major third-party and extended warranty providers and assist with the claims process whenever possible. This includes companies such as CarShield, Endurance, Zurich, and other vehicle service contract providers. Coverage depends on your specific policy, but our team will help verify benefits and communicate directly with the warranty administrator.

Do you accept walk-ins?

Yes — we welcome walk-ins whenever possible. Wait times can vary depending on the day and service needed, so we recommend calling our office at any time to check current availability or estimated wait times.

How do I schedule an appointment at Metric Motors?

Scheduling is easy. You can: Visit our website and click the red “Book Appointment” button Book directly through our Google business listing Call our office and schedule with our team We’ll help find the most convenient time for your schedule.

Do you work with fleet accounts or fleet management companies?

Yes. We work with most major fleet management providers and service a wide range of business and commercial vehicles. This includes companies such as Enterprise Fleet Management, ARI, Holman, and similar fleet programs. Any business-use or company-owned vehicle is treated with priority, as we understand that vehicle downtime directly impacts operations. We also regularly service municipal, state, public service, and construction-related vehicles, and handle fleet repairs with efficient turnaround, clear communication, and professional documentation.

Don’t Listen to Us Talk About Metric Motors. Listen to Your Neighbors

Ready to Give Your Car the
Care It Deserves?

Sign up for our newsletter to keep up to date on specials and offers.

Keep in Touch

Build Your Career at Metric Motors

Work alongside experienced professionals, use state-of-the-art equipment, and grow your skills in a fast-paced, rewarding environment.

Frequently 
Asked Questions

What types of vehicles do you service?

At Metric Motors, we service all makes and models, foreign and domestic. This includes everyday sedans and SUVs, trucks, European vehicles, performance vehicles, and hybrids. We have the tools, training, equipment, and expertise to properly service and repair modern vehicles of all types.

Do you perform New York State inspections?

Yes — we are a licensed New York State Inspection Station. Inspections are available by appointment or walk-in, depending on availability. You can schedule online, find us on Google, or call the shop directly.

How much does an oil change cost at Metric Motors?

We’re known for offering some of the best oil change values in Putnam and Dutchess Counties — and beyond. We offer a full synthetic Valvoline oil change starting at just $24.95, performed by experienced professional technicians — not a quick-lube operation. It’s one of the strongest values in the Northeast for a properly serviced, full synthetic oil change.

What makes Metric Motors different from other auto repair shops?

Metric Motors is known as the dealer alternative, without dealer pricing or limitations. We are better equipped than many dealerships, with state-of-the-art diagnostic tools, OEM programming capabilities, and advanced repair technology. We’re a true one-stop automotive destination, offering mechanical repair, auto collision services, windshield replacement, advanced diagnostics, OEM programming, and ADAS (Advanced Driver Assistance Systems) calibrations. We also offer courtesy loaner vehicles and shuttle service to help minimize downtime. Every vehicle is serviced with the same care and attention we would give our own, with a focus on doing the job correctly the first time.

Do you work with extended warranty or third-party warranty companies?

Yes. We work with most major third-party and extended warranty providers and assist with the claims process whenever possible. This includes companies such as CarShield, Endurance, Zurich, and other vehicle service contract providers. Coverage depends on your specific policy, but our team will help verify benefits and communicate directly with the warranty administrator.

Do you accept walk-ins?

Yes — we welcome walk-ins whenever possible. Wait times can vary depending on the day and service needed, so we recommend calling our office at any time to check current availability or estimated wait times.

How do I schedule an appointment at Metric Motors?

Scheduling is easy. You can: Visit our website and click the red “Book Appointment” button Book directly through our Google business listing Call our office and schedule with our team We’ll help find the most convenient time for your schedule.

Do you work with fleet accounts or fleet management companies?

Yes. We work with most major fleet management providers and service a wide range of business and commercial vehicles. This includes companies such as Enterprise Fleet Management, ARI, Holman, and similar fleet programs. Any business-use or company-owned vehicle is treated with priority, as we understand that vehicle downtime directly impacts operations. We also regularly service municipal, state, public service, and construction-related vehicles, and handle fleet repairs with efficient turnaround, clear communication, and professional documentation.

Don’t Listen to Us Talk About Metric Motors. Listen to Your Neighbors

Ready to Give Your Car the Care It Deserves?

Schedule a wash or repair in minutes — our experts are here 7 days a week to keep your car running perfectly.

Keep in Touch

Build Your Career at Metric Motors

Work alongside experienced professionals, use state-of-the-art equipment, and grow your skills in a fast-paced, rewarding environment.